Burst Pipe? What to Do in the First 30 Minutes
By Naperville Water Mitigation Editorial Team · Published
A burst pipe can put a lot of water into your home in a short time. The steps below help you limit the damage while you line up help.
Quick answer
Shut off your home's main water valve right away. It is usually in the basement or a utility room where the water line enters the house. Then stay clear of standing water near electricity, open a faucet to drain the lines, photograph the damage, and call your insurer and a plumber. Quick action limits mold.
Safety first
Water and electricity are a dangerous mix. If water reaches outlets, appliances, or your electrical panel, keep out of the water and call an electrician or your utility. Stay out from under a bulging or sagging ceiling, and call a professional.
Independent referral service. Calls connect you with a local restoration company we do not own or operate.
On this page
The first 30 minutes, step by step
- Shut off the main water valve. This stops the flow and matters most. Turn the handle clockwise until it stops. The EPA tells homeowners to shut off water valves if a pipe bursts. Not sure where yours is? See our guide to finding your main shut-off valve.
- Protect yourself from electrical danger. Switch off power to the wet area only if you can reach the breaker without stepping through water. When in doubt, wait for an electrician.
- Drain the lines. With the main off, open faucets on the lowest and highest floors so remaining water drains out. If the burst involves a hot water line, switch off the water heater if it is safe to reach.
- Contain the water. Use buckets and towels to slow the spread, and move water away from walls and floors where you can.
- Photograph and video everything before cleanup. Capture the broken pipe, the standing water, wet walls and floors, and damaged belongings. Clear records help with an insurance claim.
- Move valuables and lift furniture. Get electronics, papers, photos, and rugs into a dry room, and put furniture legs on foil or blocks.
- Make two calls. Call your insurance company to open a claim, and call a plumber to repair the pipe. A water damage provider handles drying and cleanup.
Why speed matters: the 24 to 48 hour window
The EPA advises drying water-damaged areas and items within 24 to 48 hours to prevent mold growth, and it lists fixing broken pipes as a top priority for preventing water damage and mold. Towels cannot reach moisture inside drywall, insulation, and flooring, so professional drying equipment often becomes part of the picture. Read the EPA's guide to mold and moisture for details.
Why pipes burst in Naperville winters
The City of Naperville warns that ruptured water lines can cause extensive damage to a home, and it notes that even running water can freeze in sub-zero temperatures. The City points to small openings in doors, windows, and foundations, which concentrate cold air onto pipes, and the EPA singles out water lines that run along exterior walls. The EPA also advises against setting your indoor temperature too low during extreme cold. If a pipe is frozen but not yet broken, read how to thaw frozen pipes safely.
Plumber or water damage provider: who do you call?
A plumber repairs the broken pipe. A water damage restoration provider removes water, dries the structure, and handles cleanup. Many burst pipe situations need both. When you talk to any provider, ask who will do the work, how they document moisture readings, and how they work with your insurance company.
Insurance and documentation
Coverage for burst pipes, slow leaks, flooding, and sewer backup differs from policy to policy, so read your policy and call your insurer early. Ask what they need from you and whether they want to approve repairs before work begins. Keep receipts, photos, and a list of damaged items.
Independent referral service. Calls connect you with a local restoration company we do not own or operate.
Frequently asked questions
Should I turn the heat up or down after a burst pipe?
Keep your heat on. The EPA advises against setting the indoor temperature too low during extreme cold, since cold interiors put more pipes at risk of freezing.
How soon can mold start?
The EPA advises drying water-damaged areas within 24 to 48 hours to prevent mold growth, which is why quick action matters.
Will insurance cover a burst pipe?
It depends on your policy. Policies treat sudden bursts, slow leaks, floods, and sewer backup differently. Check your policy and call your insurer to ask.
Who should I call first?
Shut off the main water valve first. Then call your insurer, a plumber for the repair, and a water damage provider for drying.
What if I cannot find or turn the main valve?
Call a plumber right away, and read our shut-off valve guide. The City of Naperville Water Utility also takes calls about water concerns.
Related guides
Sources (accessed November 19, 2026)
- City of Naperville, Freezing Water Lines
- U.S. EPA, Winter Weather and Indoor Air Quality
- U.S. EPA, A Brief Guide to Mold, Moisture and Your Home
This article offers general information, and it is not professional, legal, or insurance advice.
Naperville Water Mitigation is an independent referral service. We connect property owners with local restoration companies. We are not a licensed contractor, plumbing company, or insurance adjuster, and the companies we refer to operate independently. Verify licensing, bonding and insurance directly with the company before work begins.